Wrap Factor Instructions
Instructions for use:
Wrap Factor – method one
Preparation
§
You
can watch the Video on how to use the wrap by clicking the links
in the right hand margin of this page or carefully read the following:
Unwrap two
bandages from their packaging, remove the metal clips and place, still
rolled-up, in a suitable heat-resistant bowl, saucepan or container.
§
Boil a
kettle of water and add enough hot water to the container to cover the
surface of the bandages.
§
Open one
sachet of Wrap Factor’s Detox Clay and add the contents to the water
and two bandages.
§
Lightly
stir in the clay with a spoon and leave to soak for at least 30
minutes.
Measurement
§
Place the
tape measure around the area you intend to treat and measure with the
tape provided.
§
Mark the
position of the tape on your skin with a pen. This is an important
step so that when you come to re-measure after the treatment, you will
obtain an accurate and precise record of your inch loss.
§
Record
your measurements on the chart provided at the back of the instruction
leaflet.
The Wrapping Process
§
After
soaking the bandages in the Wrap Factor clay solution for 30 minutes,
test the temperature of the water. It should not be boiling, but just
warm to the touch. Be careful not to burn yourself and be aware that
the bandages retain a great amount of heat.
§
If
necessary, top up with hot or cold water as appropriate, so that it
feels warm to the touch.
§
Gently
wring out excess water from the bandages.
§
Wrap
around your chosen area – please refer to the diagrams provided for an
indication of the different potential areas for treatment.
§
Always
wrap from the lowest point of you body in an upwards direction.
§
You must
be firmly wrapped, but not so tight as to hinder circulation or
breathing.
§
Cover your
chosen area with punctured cling film and/or a heavy towel. It is
important to retain as much warmth as possible during the process and
to ensure the bandages do not get too cold during the treatment.
§
Ensure
that your skin can still breathe hence the importance of puncturing
the cling film before use.
§
Leave for
sixty minutes and relax. We suggest that you wear a dressing gown or
towelling robe during this time.
The Unwrapping Process
§
Unwrap the
bandages and, if necessary, rub any excess clay residue into your skin
– there is no need to shower. The clay solution remains in your skin
for three to four days after the wrap continuing the dual detox and
tightening process
§
Re-measure
your chosen area, ensuring that the tape is in the same marked
position as when you started.
§
Compare
your measurements to those recorded earlier on the chart at the back
of the instruction leaflet.
§
Calculate
your total inch loss. No cheating please.
After Care
§
We recommend that for 3-4 days after the wrap, you drink at least two
litres/four pints of water a day.
Wrap Factor is not a water loss treatment, so the more water you drink
the more toxins you are flushing out through your lymphatic system.
§
This
inch-loss process may continue for several days and can be aided by
bathing in lukewarm water.
§
Bandages
should be washed after use on a 40ºc washing cycle and are reusable.
For an alternative wrapping method - method 2 - see the right hand margin.

|